Hardware

Ionetrics develops high performance components for standards driven data acquisition systems.

Annotator CL Base
The Annotator CL Base accepts data from CameraLink or TTL inputs and injects a precision IRIG referenced time stamp, 32-bit scan or frame number, user defined image statistics, and other user-defined annotation data directly into the digital data stream. The Annotator CL Base provides two CameraLink outputs and a CameraLink breakout box function.

Annotator CL Full
The Annotator CL Full accepts data from CameraLink injects a precision IRIG referenced time stamp, 32-bit scan or frame number, user defined image statistics, and other user-defined annotation data directly into the digital data stream. The Annotator CL Full provides two CameraLink outputs for Base Medium and Full and a CameraLink three breakout box function.

Annotator CL GPS
The Annotator CL GPS accepts data from CameraLink and injects a precision IRIG or GPS referenced time stamp, 32-bit scan or frame number, user defined image statistics, and other user-defined annotation data directly into the digital data stream. The Annotator CL GPS provides two CameraLink outputs for Base Medium and Full and a CameraLink three breakout box function.

RAD 100
The RAD 100 Infrared Radiometer provides a means to measure infrared radiation from 1 to 12 microns in wavelength. Sources can be continuous wave or pulsed. Options are available for InSb and HgCdTe detectors with integrated closed cycle coolers. Design allows for addition of user supplied filters. Variable preamp gain (1, 2, 4, 8, 16, 32, 128) and user selectable filter cutoff (32KHz, 100KHz, or 375KHz). On-board 16-bit A/D with Annotator based data acquisition and control (with IRIG time stamp). Optional integration with Edgar data acquisition and processing software.

Preamp200
The Preamp200 is a single channel preamplifier and ADC optimized for use with MCT, InSb, and Ge optical detectors. The ADC supports 16-bit sampling rates up to 1MHz (Analog Devices AD7677). Each Preamp200 has a 4-bit ID, and up to four Preamp200 boards can be connected to a single Annotator CL Base.